Smeg Basic line GW4060 60cm w/drying system glassware washer


GW4060 is a glassware washer designed to work with either one or two independent and flexible washing levels. The washing chamber measures 530x510x620 mm (168l gross). Possibility for washing, thermic and chemical disinfection (up to 95°C) and forced-air drying system with filter.

Smeg-GW4060

Specifications and Technical Features

GW4060 (art. 860296)

LABORATORY GLASSWARE WASHER WITH DRYING SYSTEM

  • washing up to 95°C – antibacterical thermal disinfection
  • programs: 9 default + 6 custom
  • microprocessor programmable electronic control
  • serial port RS232 for connection to external printer or PC
  • forced hot air drying system with air filter 98% DOP
  • alkaline powder detergent dispenser
  • peristaltic pump for acid liquid neutralizer
  • possibility of installing up to 2 additional peristaltic pumps
  • washing chamber and internal door in AISI 316L stainless steel
  • external panels made of AISI 304 stainless steel
  • n. 2 independent washing levels through telescopic guides
  • external dimensions LxDxH: 600 x 600 x 850 mm
  • internal working dimensions LxDxH: 525 x 490 x 570 mm
  • incorporated water softener with salt sensor
  • cold water and demineralized water connections
  • electronic door lock system for user safety
  • electrical connection: 3/N/PE 400 V – 50 Hz – 7 kW max
  • single phase version available: 1/N/PE 230 V – 50 Hz – 2,8 kW max (GW4060-1)
  • 60 Hz version available
  • without trolleys

OTHER POSSIBLE CONFIGURATIONS

GW4060A (art. 860704) – LABORATORY GLASSWARE WASHER WITH DRYING SYSTEM

  • standard equipment
  • booster pump for non-pressure demineralized water

GW4060C (art. 860186)

LABORATORY GLASSWARE WASHER WITH DRYING SYSTEM

  • standard equipment
  • high efficiency steam condenser Ecoslim, with cold water injection

GW4060CA (art. 860705)

LABORATORY GLASSWARE WASHER WITH DRYING SYSTEM AND STEAM CONDENSER

  • standard equipment
  • high efficiency steam condenser Ecoslim, with cold water injection
  • booster pump for non-pressure demineralized water

Machine optionals

  • AF4060 – ABSOLUTE HEPA FILTER
  • AS4060 – AQUA STOP WATER LEAK KIT
  • B6040L – STAINLESS STEEL PLINTH FOR 60 CM MACHINES WITH LOCK
  • FLUX4060 – DOSING CONTROL FOR ADDITIONAL PERISTALTIC PUMPS
  • IRCP – CEILING SPRAY ARM
  • P14060 – PERISTALTIC PUMP FOR LIQUID DETERGENT
  • P34060 – PERISTALTIC PUMP FOR CAUSTIC SODA
  • P44060 – PERISTALTIC PUMP FOR LIQUID ANTIFOAM
  • PAD1 – BOOSTER PUMP FOR NON-PRESSURE DEMINERALIZED WATER
  • PAD2 – BOOSTER PUMP FOR NON-PRESSURE DEMINERALIZED WATER
  • PAD2-60 – BOOSTER PUMP FOR NON-PRESSURE DEMINERALIZED WATER
  • PAD2R – PAD2 RELAY KIT
  • PAD2X – ST. STEEL BOOSTER PUMP FOR NON-PRESSURE DEMINERALIZED WATER
  • PAD2X-60 – BOOSTER PUMP FOR NON-PRESSURE DEMINERALIZED WATER – 60 HZ
  • T6040 – STAINLESS STEEL FRAME FOR 60 CM MACHINES
  • TOP60I – BUILT-IN TOP 60 CM
  • TRACELOG – REMOTE CONTROL AND TRACEABILITY SOFTWARE
  • WD-LANE – DATA COMMUNICATION CARD
  • WD-LS3060 – DETERGENT LEVEL SENSOR
  • WD-PRINTE – EXTERNAL PRINTER
Smeg-GW4060

GW4060S (art. 860297)

LABORATORY GLASSWARE WASHER WITH DRYING SYSTEM

  • washing up to 95°C – antibacterical thermal disinfection
  • programs: 9 default + 6 custom
  • microprocessor programmable electronic control
  • serial port RS232 for connection to external printer or PC
  • forced hot air drying system with air filter 98% DOP
  • peristaltic pump for liquid detergent
  • peristaltic pump for acid liquid neutralizer
  • possibility of installing one additional peristaltic pump
  • washing chamber and internal door in AISI 316L stainless steel
  • external panels made of AISI 304 stainless steel
  • n. 2 independent washing levels through telescopic guides
  • external dimensions LxDxH: 600 x 600 x 850 mm
  • internal working dimensions LxDxH: 525 x 490 x 570 mm
  • incorporated water softener with salt sensor
  • cold water and demineralized water connections
  • electronic door lock system for user safety
  • electrical connection: 3/N/PE 400 V – 50 Hz – 7 kW max
  • single phase version available: 1/N/PE 230 V – 50 Hz – 2,8 kW max (GW4060S1)
  • 60 Hz version available
  • without trolleys

OTHER POSSIBLE CONFIGURATIONS

GW4060SA (art. 860706)

LABORATORY GLASSWARE WASHER WITH DRYING SYSTEM

  • standard equipment
  • booster pump for non-pressure demineralized water

GW4060SC (art. 860280)

LABORATORY GLASSWARE WASHER WITH DRYING SYSTEM

  • standard equipment
  • high efficiency steam condenser Ecoslim, with cold water injection

GW4060SCA (art. 860707)

LABORATORY GLASSWARE WASHER WITH DRYING SYSTEM

  • standard equipment
  • high efficiency steam condenser Ecoslim, with cold water injection
  • booster pump for non-pressure demineralized water

Machine optionals

  • AF4060 – ABSOLUTE HEPA FILTER
  • AS4060 – AQUA STOP WATER LEAK KIT
  • B6040L – STAINLESS STEEL PLINTH FOR 60 CM MACHINES WITH LOCK
  • FLUX4060 – DOSING CONTROL FOR ADDITIONAL PERISTALTIC PUMPS
  • IRCP – CEILING SPRAY ARM
  • P34060 – PERISTALTIC PUMP FOR CAUSTIC SODA
  • P44060 – PERISTALTIC PUMP FOR LIQUID ANTIFOAM
  • PAD1 – BOOSTER PUMP FOR NON-PRESSURE DEMINERALIZED WATER
  • PAD2 – BOOSTER PUMP FOR NON-PRESSURE DEMINERALIZED WATER
  • PAD2-60 – BOOSTER PUMP FOR NON-PRESSURE DEMINERALIZED WATER
  • PAD2R – PAD2 RELAY KIT
  • PAD2X – ST. STEEL BOOSTER PUMP FOR NON-PRESSURE DEMINERALIZED WATER
  • PAD2X-60 – BOOSTER PUMP FOR NON-PRESSURE DEMINERALIZED WATER – 60 HZ
  • T6040 – STAINLESS STEEL FRAME FOR 60 CM MACHINES
  • TOP60I – BUILT-IN TOP 60 CM
  • TRACELOG – REMOTE CONTROL AND TRACEABILITY SOFTWARE
  • WD-LANE – DATA COMMUNICATION CARD
  • WD-LS3060 – DETERGENT LEVEL SENSOR
  • WD-PRINTE – EXTERNAL PRINTER
Smeg-GW4060S

Technical Features

 GW4060 TECHNICAL FEATURES  All versions
 Electronic control  microprocessor
 Standard programs stored  9
 Customisable programs  6
 Display with segments and communication  yes, 4 digits
 Clock and calendar  yes
 Tank internal temperature  from room temperature to 95°C
 Accuracy  0,1°C
 Temperature sensors in tank  n° 1 x PT 1000 CLASS B IEC 60751
 Detergent and agents dosing system  max. 1 powder dispenser,1 pump for neutralizing agent and 2 other pumps as optional
 Detergent level sensor  optional
 Safety lock  yes, with electromagnetic release and automatic opening
 Safety devices  safety thermostats, door interlock
 Alarm display  30
 Troubleshooting menu  yes, using PC connection
 Programme editing  yes, using 6 customizable programs
 AUXILIARY FUNCTIONS
 Storage of data for 250 most recently run programs  yes
 RS232 serial port for PC connection  yes
 RS232 serial port for printer  yes
 Cycle storage  yes
 Cycle file download  yes
 DRYING SYSTEM
 Drying fan  yes
 Drying heating element  0,8 kW
 Prefilter class C 98%  yes
 HEPA filter class S 99,999%  optional
 WATER SUPPLY (PRESSURE 1,5-5 BAR)
 Cold water inlet  yes, hardness max 42°f
 Demineralized water inlet  yes, < 30 μS/cm
 Demineralized water booster pump  optional
 Water softener incorporated  yes
 Recirculation pump  400 l/min
 WATER HEATING
 Electrical  6,3 kW on three-phase version, 2,3 kW on single-phase version
 STEAM CONDENSER  yes
 DIMENSIONS LxDxH mm
 Outside (with built-in top)  600x605x850 (830)
 Inside (gross)  530x510x620
 Net weight (Kg)  77
 STAINLESS STEEL
 Wash tank  AISI 316L
 Exterior covering  AISI 304
 ELECTRICAL POWER SUPPLY
 Max. voltage/power  1/N/PE 230V ~ 50Hz 2,8 kW 3/N/PE 400V – 50 Hz 7,0 kW
 NOISE LEVEL  max 50 dB

Possible Washing Configuration – GW4060 Series

Smeg-two-spray-level

TWO SPRAYING LEVELS
This configuration has two washing levels with spray arms for different types of glassware.

Photo:
CS1-1 upper basket: it is fitted with RC1/2 net in the right side for the support of various glass items. On the left side: test tube accessory.
CS2 lower basket: SB28 insert on the right and SB30 on the left for washing beakers, flasks, plates and various other materials.

ONE MIXED INJECTION LEVEL
This configuration has one mixed injection washing level suitable for washing narrow-necked glassware and pipettes.

Photo:
LPM2020: this system allows simultaneously washing narrownecked glassware (flasks, beakers, round-bottom flasks) and 20 pipettes.Specific carriers for laboratories which clean many different types of glassware at the same time.

Smeg-one-mixed-injection
Smeg-one-injection-level

ONE INJECTION LEVEL
This configuration has one injection washing level suitable for washing narrownecked glassware.

Photo:
LM40: universal injection carrier as it optimises washing of narrow-necked glassware of different sizes. It has a capacity of 40 items and can wash both large items and small flasks or bottles.

Accessories – GW4060 Series

LM40DS
WASHING SOLUTION FOR NARROW-NECKED GLASSWARE TILL 49CM IN HEIGHT

LPT100DS
WASHING SOLUTION FOR 100 PIPETTES TILL 45CM IN HEIGHT

LPM2020DS
WASHING SOLUTION FOR 20 TEST TUBES AND 20 NARROW-NECKED GLASSWARE

SB25
WASHING SOLUTION FOR BEAKERS AND FLASKS TILL 500ML. TO BE PLACED ON CS1-1 AND CS2

Smeg-CS1-1

CS1-1

UPPER LEVEL BASKET

Basic upper basket with sprayer. Suitable for glassware treatment.

CS2

LOWER LEVEL BASKET

Basic lower basket. Suitable for glassware treatment.

.

Smeg-CS2
Smeg-SB9

SB9

9 POSITION INSERT

Made of stainless steel, it is suitable for washing beakers and cylinders of max. 100 ml and funnels.

Dimensions: W x D x H = 420 x 145 x 160 mm

An insert for 14 positions is also available (SB14).

Dimensions: W x D x H = 422 x 146 x 184 mm

SB15

15 POSITION INSERT

Made of stainless steel, it is suitable for washing beakers and flasks. For use in combination with standard CS1-1 and CS2 baskets of 16 items and is made of stainless steel.
Recommended for flasks with a capacity of up to 1000 ml.

Dimensions: W x D x H = 400 x 195 x 115 mm

Smeg-SB15
Smeg-SB28

SB28

28 POSITION INSERT

Made of stainless steel, it is suitable for washing beakers and flasks. For use in combination with standard CS1-1 and CS2 baskets and LM20 insert. It has a capacity for 16 items and is made of stainless steel.
Recommended for flasks with a capacity of up to 1000 ml.

Dimensions: W x D x H = 400 x 195 x 185 mm

SB30

30 POSITION INSERT

Made of stainless steel, it is suitable for washing beakers of any size. For use in combination with standard CS1-1 and CS2 baskets and LM20 insert. It has a capacity of 30 items and is made of stainless
steel. Recommended for flasks with a capacity of up to 500ml.

Dimensions: W x D x H = 400 x 195 x 150 mm

An insert for 25 positions is also available (SB25).

Smeg-SB30
Smeg-CSK1

CSK1

1-LEVEL SMALL GLASSES AND OBJECTS INSERT

It is suitable for washing glasses and objects of small dimensions.level

Dimensions: L x D x H 450 x 450 x 55mm, mesh 5 x 5mm

Space needed: entire washer

CSK2

½ LEVEL SMALL GLASSES AND OBJECTS INSERT

It is suitable for washing glasses and objects of small dimensions.

Dimensions : L x D x H 450 x 225 x 55mm, mesh 5 x 5mm

Space needed: half of a washer level

Smeg-CSK2
Smeg-CP-series

SERIES “CP”

¼ LEVEL TEST TUBE INSERT

Compartment suitable for test tubes up to 160. Accessory composed by 3 compartments and a lid. Different sizes depending on the test tubes model.

Space needed: 1/4 of a washer level.

CP105: test tubes up to 75 mm in height
CP132: test tubes up to 105 mm in height
CP192: test tubes up to 165 mm in height
CP222: test tubes up to 200 mm in height

Smeg-PB50

PB50

BOTTLE INSERT

Suitable for holding 56 50 ml wide-necked bottles (screw cap GL32 ISO4796 or ground cap DIN12038 or non-standard cap).
Max. bottle size: diam. 46 mm – h 87 mm.

PB100 (not in photo) suitable for holding 32 100 ml widenecked bottles (screw cap GL45 ISO4796 or ground cap DIN 12038 or non-standard cap).
Max. bottle size: diam. 56 mm – h 100 mm.

PB500

BOTTLE INSERT

Suitable for holding 21 500 ml wide-necked bottles (screw cap GL32 ISO4796 or ground cap DIN 12038 or non-standard cap).
Max. bottle size: diam. 86 mm – h 177 mm.

PB250 (not in photo) suitable for holding 25 250 ml widenecked bottles (screw cap GL45 ISO4796 or ground cap DIN 12038 or non-standard cap).
Max. bottle size: diam. 70 mm – h 138 mm.

Smeg-PB500
Smeg-PB1000

PB1000

BOTTLE INSERT

Suitable for holding 16 1000 ml wide-necked bottles (screw cap GL45 ISO4796 or ground cap DIN 12038 or non-standard cap).
Max. bottle size: diam. 101 mm – h 225 mm.

Smeg-PV105

PV105

SLIDES INSERT

Microscope slide insert made of stainless steel. Suitable for positioning 105 standard microscope slides.
Dimensions l x d x h = 220x143x60 mm.

SL6

PLATE INSERT

It is suitable for washing up to Olympus-type plate for optical recognition of the blood unit. Hinged lid included.
Dimensions l x d x h = 485x145x80 mm.

Smeg-SL6
Smeg-SL9

SL9

CHROMATOGRAPHIC PLATES INSERT

Made of stainless steel, it is suitable for washing chromatographic plates. Capacity of 9 items.
It takes up 1/2 the space of a standard basket.

SL18

CHROMATOGRAPHIC PLATES INSERT

Made of stainless steel, suitable for washing 20×20 standard chromatographic plates. Capacity of 18 items. The guides are shaped in such a way that the support points are outside the working surface.

Smeg-SL18

SERIES “PD”

DIFFERENT DIMENSIONS PETRI DISH INSERT

PD70S – 40 items, 50-70 mm positioned on the upper level CS1-1.
PD100S – 38 items, 70-120 mm positioned on the upper level CS1-1.
PD70I 40 items, 50-70 mm positioned on the lower level CS2.
PD100I – 38 items, 70-120 mm positioned on the lower level CS2.

Smeg-PD-series
Smeg-PF-series

SERIES “PF”

DIFFERENT DIMENSIONS MESHES

PF1/2, ½ space of CS2 or CS1-1
PF1, whole CS1-1
PF2, whole CS2

SA3

DIFFERENT DIMENSIONS HOLDING NETS

RC1 net covering a whole carrier,
RC1/2 net covering ½ carrier,
RC1/4 net covering 1/4 carrier

Smeg-SA3
Smeg-U-series

SERIES “U”

SPIGOTS OF DIFFERENT DIMENSIONS

Injection spigots available in the following versions:
– spigot for 6% and 12% butyrometers
– Nylon spigot for pipettes
– Spigots for glassware with the following heights: 90, 110, 140, 160, 180, 220, 240, 260 mm.

Suitable as spare parts on carriers already in use or to equip customizable carriers.

Smeg-LM20DS

LM20DS

UNIVERSAL FLASK WASHING CARRIER

Stainless steel carrier for washing and drying narrow-necked glassware up to 490 mm in height. Fitted with 20 nozzles and half the carrier space is free for mixed glassware suitable for a 1⁄2 basket accessory.

Positioned on the lower level.

LM40DS

UNIVERSAL NARROWNECKED GLASSWARE WASHING CARRIER

Stainless-steel carrier for washing and drying narrow-necked glassware up to 490 mm in height, flasks, round-bottom flasks and graduated cylinders of various sizes.

Positioned on the lower level.

Smeg-LM40DS
Smeg-LM40SDS

LM40SDS

UNIVERSAL NARROW-NECKED GLASSWARE WASHING CARRIER

Stainless-steel carrier for washing and drying narrow-necked glassware up to 225 mm in height. Carrier with 40 spigots with the same height.

Positioned on the upper level.

LM80DS

UNIVERSAL NARROW-NECKED GLASSWARE WASHING CARRIER

Stainless-steel carrier for washing and drying narrow-necked glassware up to 225 mm in height. Carrier with 80 spigots with the same height.

Positioned on two levels.

Smeg-LM80DS
Smeg-LB4BDS

LB4BDS

BOTTLE WASHING CARRIER

Stainless steel trolley for washing and drying large glass items with drying system connection. Suitable for washing 2 x 10 L bottles or 4 x 5 L bottles. Fitted with 8 special spigots.

Positioned on the lower level.

LBT5DS

BOTTLE WASHING CARRIER

Stainless steel carrier for large glass items washing with drying system connection. Suitable for washing and drying of five 5-litre bottles (diam. 180 x h.500mm, max neck diameter 80 mm). Fitted with 5 special spigots.

Positioned on the lower level.

Smeg-LBT5
Smeg-LB8DS

LB8DS

BOTTLE WASHING CARRIER

Stainless steel carrier for washing large glass items with drying system connection. Suitable for washing 8 bottles of maximum 50 cm in height. Fitted with 8 U6260 spigots and 8 special spigots.

Positioned on the lower level.

LB16DS

BOTTLE WASHING CARRIER

Stainless steel carrier for washing and drying 16 narrow or wide-necked bottles of 250-1000 ml (max. diam. 101 mm, h 450mm) or graduated cylinders (diam. max. 101 mm – h 495 mm).

Positioned on the lower level.

Smeg-LB16DS
Smeg-LB16SDS

LB16SDS

BOTTLE WASHING CARRIER

Stainless steel carrier for washing and drying 16 narrow or wide-necked bottles of 250-1000 ml (max. diam. 101 mm, h 250mm).

Positioned on the upper level.
LB16IDS (not shown in the photo): same carrier for the lower level.

LB32DS

BOTTLE WASHING CARRIER

Stainless steel carrier for washing large glass items with drying system connection. Suitable for washing 32 narrow or wide-necked bottles of 250-1000 ml, max. diam. 101 mm, H.245 mm.

Positioned on 2 levels.

Smeg-LB32DS
Smeg-LB1-20DS

LB1-20DS

WASHING CARRIER FOR BOTTLE OR DRUM

Stainless steel carrier for washing universal large glass items and suitable for washing one large bottle and/or drum with drying system connection. Bottle maximum dimensions diameter 300 x h. 350 mm.

Positioned on lower level.

Smeg-LPM2010DS

LPM2010DS

MIXED INJECTION CARRIER FOR FLASKS, PIPETTES AND TEST TUBES

Stainless steel carrier for washing flasks, pipettes and test tubes with drying system connection. Suitable for washing and drying of 10 pipettes up to 55 cm + 20 narrow-necked glass items + ¼ free space to be filled with a CP series test tube basket.

Positioned on the lower level.

LPM2020DS

MIXED INJECTION CARRIER FOR FLASKS AND PIPETTES

Stainless steel carrier for mixed washing of flasks and pipettes with drying system connection. Suitable for washing and drying 20 pipettes up to 550 mm in height and 20 narrow-necked glassware with a
maximum height of 49 cm.

Positioned on the lower level.

Smeg-LPM2020DS
Smeg-LR4DS

LR4DS

REACTORS WASHING CARRIER

Stainless steel trolley for washing and drying four 3/5-way reactors of maximum 3 litres or up to 12 narrow-necked glass items. Fitted with 20 U6260 nozzles.

Positioned on the lower level.

LT20DS

WASHING CARRIER FOR FISCHER BOTTLES

Stainless steel carrier with drying system connection for washing and drying of 12 Fischer bottles and graduated cylinders with a maximum height of 55 cm. 6 positions for injection washing of narrow-necked
glassware. Fitted with 18 spigots.

Positioned on the lower level.

Smeg-LT20DS
Smeg-LPV40DS

LPV40DS

PIPETTES WASHING CARRIER

Stainless steel carrier for washing and drying volumetric pipettes up to 55 cm in length. 20 positions for pipettes of 55 cm in height and 20 positions for pipettes and/or flasks of 45-49 cm in height.

LPT100DS

PIPETTES WASHING CARRIER

Stainless steel carrier for washing and drying 100 pipettes with a capacity of 1 to 20 ml and a height up to 450 mm. The pipette washing disc is fitted into the carrier to allow fast loading and unloading access.

Smeg-LPT100DS
Smeg-KP100DS

KP100DS

TAPERED AND CYLINDRICAL TEST TUBE CARRIER

Stainless steel carrier with drying system connection for washing of tapered and cylindrical test tubes by internal injection. It has a maximum capacity of 100 test tubes.

Positioned on the upper washing level.

KP200DS (not shown in the photo): same carrier on two washing levels with a maximum capacity of 200 test tubes.

LB40DS

BUTYROMETER WASHING CARRIER

Stainless steel carrier for butyrometer washing with drying system connection. Suitable for washing and drying of 40 butyrometers. Specify the type of butyrometer in the order.

Positioned on the upper level.

Smeg-LB40DS

Related Products