Auto Dry ED series (20~50%RH)


[Humidity Control: 20~50%RH]

Totech Auto Dry ED series is engineered for long-term storage of 20%~50%RH. The circulation of air in the cabinet is regulated by an internal fan. Hygrometer is battery operated.

Features:

  • Modular design: Totech Auto Dry is modularly designed dry cabinet. The main modules include dry unit, shelves, castors, hygrometer. All of the modules can be replaced easily. Totech dry cabinet can be used as long as the cabinet structure is in good condition. Most of our customers can use the Totech dry cabinets for more than 10 years without any problem.
  • Dry units: ≤20%RH, made in Japan.
  • ED-138 works automatically and continuously, and it is “plug and play” cabinet. Humidity is shown on hygrometer.

 

Dehumidification Principle:

  1. Totech Super Dry relies on dry units to control humidity levels, and the dry unit will be recycled every several hours to discharge the moisture absorbed through shutter to outside the cabinet. After recycling, the shutters will close and moisture inside dry cabinet will once again be absorbed by refreshed drying agent.
  2. This dehumidification cycle will continue until the set humidity value is achieved. Once the humidity level exceeds the setting level, this dehumidification cycle will start again.

 

Applications:

  • Micro-films and positive/negative films.
  • Antiques and ancient documents.
  • Electronic devices, PCBs and IC packages before removing from moisture barrier bags.
  • Powered medicines.
  • Micro-lens and microscope lens, etc.

Model ASD-1006 ED-508 ED-268 ED-138
External
WxHxD(cm)
120x184x69 88x90x76 88x90x40 44x90x40
Internal
WxHxD(cm)
119x156x62 87x84x70 87x84x34 42x84x29
Capacity(L) 1160 510 252 121
Weight(kg) 155 58 33 21
Power Consumption 12.6W/h 6.3W/h 6.3W/h 1.9W/h
Voltage AC220V, 50/60Hz
Material Steel body with gray painting
Steel Shelves 5 pcs 3 pcs