Combination Shower/Eyewash w/ SS Bowl Hand/Food Operated
COMBINATION SHOWER/EYEWASH WITH SS BOWL HAND/FOOT OPERATED
Third party certified to ANSI Z358.1, thecombination shower and eyewash shall deliver 30 gpm (113.6 lpm) @ 30/70 psi (206.8/482.6 kPa) of flowing pressure from the shower head and 2.4 gpm (9.1 lpm) @ 30/70 psi (206.8/482.6 kPa) of flowing pressure from the eyewash. Unit shall provide a non-injurious stream of water for 15 minutes or longer. Combination unit shall be supplied with chrome plated (CP) bronze single motion activation stay open ball valves with CP balls. Valve sizes: shower 1”, eyewash ½”. Unit shall include dual operated hand or foot treadle actuators for the eyewash, SS actuator with actuation graphic for shower, schedule 80 hot dip galvanized steel piping and 1¼” supply/drain connection with flanged floor mounting plate for free-standing installation. Shower head shall be supplied with self-adjusting 30 gpm (113.6 lpm) regulator. Eyewash heads to be supplied with self-adjusting 2.4 gpm (9.1 lpm) regulator to assure a constant and even dual stream flow pattern under 30/70 psi (206.8/482.6 kPa) hydraulic conditions. Shower head and foot treadle to be manufactured of UV resistant high visibility yellow ABS plastic. Shower head must deliver a minimum of 20” (50.8 cm) diameter pattern tothe target area 60” (152.4 cm) above standing level. Eyewash heads with integral hinged cover to be manufactured of solvent resistant acetal mounted on a chrome plated brass wye in a type 304 SS bowl. Eyewash covers are provided to inhibit dust and/or contamination when not in use. Combination units that provide improper flow pattern or contain deteriorating screens/filters are not acceptable.
MATERIALS OF CONSTRUCTION:
PIPING: Schedule 80 hot dip galvanized steel.
VALVES: Chrome plated bronze stay open ball valves with chrome plated balls, stainless steel valve stems, ABS plastic foot treadle (eyewash), stainless steel push plate with actuation graphic (eyewash) and stainless steel pull rod assembly with actuation graphic (shower).
SHOWER HEAD: Yellow ABS plastic shower head.
EYEWASH HEAD: Acetal dual stream heads with integral hinged cover and chrome plated brass wye assembly.
BOWL: Type 304 stainless steel.
REGULATOR: Self adjusting 30 gpm (113.6 lpm) shower and (2) 1.2 gpm (4.5 lpm) eyewash regulators.
SUPPLY: 1 ¼” NPT
WASTE: 1 ¼” NPT
WEIGHT: 61 lbs (27.66 kgs)