MOC-120H Moisture Analyzer

Your Location: Main > Equipment > Balance

Accurate moisture measurement with new weight sensor: UniBloc

The moisture content of a variety of samples can be measured using an array of drying modes. The drying status can be seen at-a-glance with the fluctuation range display. Active in a variety of fields (cereals, starch, flour, noodles, brewed products, sea foods and marine products, meat products, spices, sweets, dairy products, dried foods, vegetable oils and other food articles; pharmaceuticals; ores; cokes; glass materials; cement; chemical fertilizers; pulp and paper; cotton; various fabrics and other industrial goods); enabling measurement of samples (cereals, foods, and chemical products) under various conditions (powder, particles, paste, and liquid).

Large Pan

A large sample pan (130mm diameter) enables a large amount of sample to be placed evenly in a thin layer. This results in accurate and fast measurements with minimal drying non-uniformities.

Long-life heater

A mid-wave infrared quartz heater provides effective drying without interference for a wide range of samples. In addition to the excellent drying performance, it offers a long operational life of 20,000 to 30,000 hours.

UniBloc sensor

The internal precision weighing balance is engineered with a Shimadzu UniBloc cell. The mechanism provides excellent stability and a long operational life against repeated temperature changes, enabling easy measurements down to 0.001g.

Moisture vaporization monitoring

The moisture vaporization rate is monitored and can be visually seen on a bar graph display. This is useful to know as the measurement nears completion. It updates every 30 seconds.

Three drying modes besides standard drying mode

Rapid drying mode

First dries with the highest temperature for the specified period, then shifts to the specified temperature, thus shortening measurement time.

Slow drying mode

Mildly heats samples that may solidify in the surface or samples that reduce under high temperature.

Step drying mode

Allows changing drying conditions step by step. This feature is useful when measuring samples that contain a large amount of water (up to 5 steps).

Predictive measuring mode

With preparatory measurements of the sample, the final result is predicted from the drying process. As a result, it saves a fair amount of time during repeated measurements.

Features:

Minimum display: 0.001g
Maximum sample capacity: 120g
Moisture content measurement range: 0.01% to 100%
Temperature range: 30°C to 180°C
Designed to set large amount of sample on the pan (1300mm diameter)
Equipped with mid-wave infrared quartz heater and able to operate up to 30,000 hours
Moisture vaporization rate is monitored and can be seen on the display
Sample drying process can be done in 4 ways (Rapid, Slow, Step drying and Standard drying)

Specifications:

Model	MOC-120H (#321-63300-10)
Measuring method	Heat drying and weight loss
Sample pan size	130mm dia
Minimum display in weighing	0.001g
Measurement range of moisture content	0.01% to 100.00%
Moisture content minimum display	0.01%
Sample capacity	120g
Measurement modes	Automatic or Timed ending modes, Standard, Rapid, Slow and Step drying modes, Predictive Measuring mode
Drying heater	Mid-wave infrared quartz heater
Setting temperature range	30 to 200°C by 1°C increments (Sample position temperature)
Dimensions	220W × 415D × 190H (mm)
Weight	4.5 kg
Operational temperature and humidity range	5 to 40°C, 85% RH or lower
Power requirements	AC 100 to 120 / 220 to 240 V, 640 W maximum
Standard accessories	Sample pan 2 pcs, Sample pan handler 2 pcs, Aluminum sheet 20 pcs, Spoon, Spatula
Stored procedures	10