OmniaTap (Type I + II water)


OmniaTap 

Der Allrounder.
For H2O pure types I + II.

OmniaTap is the ideal system when both pure water and ultrapure water are required, but in relatively small amounts. The ability to provide both types from a single system results from the combination of ultramodern purification technologies. These also make it possible to connect the system directly to tap water. A press on the dispenser button activates dispensing of ultrapure water type I via the digital dispenser control. The recirculation of the pure water held in the installed 10 litre tank keeps it permanently at type II quality. The pure water tank has a second outlet for feeding downstream end users.

Features

Bulletpoint OptiFill dispenser is standard
Bulletpoint Pretreatment set for direct connection to tap water
Bulletpoint 10-litres pure water tank
Bulletpoint Tank volume display in percent
Bulletpoint Simple and economical filter replacement
Bulletpoint Leakage sensor is standard
Bulletpoint Ready-to-use, including filter cartridges

One hand operation

Easy water dispensing

Flexible on a work surface

Flow Chart

Specifications OmniaTap OmniaTap UV OmniaTap UV/UF
Type I
Conductivit µS/cm 0.055 0.055 0.055
Resistance MΩ x cm 18.2 18.2 18.2
TOC-value* ppb 5 – 10 1 – 5 1 – 5
Dispensing performance l/min. up to 2 up to 2 up to 1.6
Endotoxins* EU/ml < 0.001
Particles**/ml < 1 < 1 < 1
Bacteria** CFU/ml < 0.1 < 0.1 < 0.1
Type II
Pure water performance l/h at 15 °C 6 or 12 6 or 12 6 or 12
Conductivity µS/cm 0.067 – 0.1 0.067 – 0.1 0.067 – 0.1
Resistance MΩ x cm 15 – 10 15 – 10 15 – 10
Pure water tank pressurized outlet optional optional optional
Feedwater requirements
Tap water according to DIN 2000
Feedwater temperature °C + 2 up to 35 + 2 up to 35 + 2 up to 35
Manganese and iron content mg/l < 0.05 < 0.05 < 0.05
Free chlorine content mg/l < 0.1 < 0.1 < 0.1
Silt density index (SDI) max. 3 max. 3 max. 3
Technical data
Operating pressure bar 2 – 6 2 – 6 2 – 6
Supply voltage Volt/Hz 90-240/50-60 90-240/50-60 90-240/50-60
Connected load kW 0.1 0.1 0.1
Connector size mm 3/4″ 3/4″ 3/4″
Ambient temperature °C + 2 up to + 35 + 2 up to + 35 + 2 up to + 35
Dimensions*** W x H x D mm 390 x 720 x 615 390 x 720 x 615 390 x 720 x 615
Weight kg 20 21 21
* in dependence on the feedwater quality       ** with sterilizing filter 0.2 µm       *** with OptiFill Dispenser
Order no. System type* Typical applications
18200051 OmniaTap 6 AAS, IC, ICP, buffers and media preparation
18200101 OmniaTap 12 AAS, IC, ICP, buffers and media preparation
18200052 OmniaTap 6 UV Ultra-trace analysis, ICP-MS, HPLC, TOC
18200102 OmniaTap 12 UV Ultra-trace analysis, ICP-MS, HPLC, TOC
18200053 OmniaTap 6 UV/UF Life science and microbiology, cell culture media
18200103 OmniaTap 12 UV/UF Life science and microbiology, cell culture media
Accessories
19200300 Wall mount Omnia
19200056 Disinfection kit Omnia
19200057 Disinfectant Omnia – 3 pcs./pack
19200021 Pre-treatment unit OmniaTap –10“