OmniaLabED+ (Type I + II water)


OmniaLabED+ 

The big one.
For H2O pure types I + II.

OmniaLabED+ is the system of choice when both pure water and ultrapure water are needed for the entire laboratory. The system complies with international water standards such as ASTM, ISO 3696 and CLSI. The economy of it is maximized by the inclusion of a continuously self-regenerating electrodeionizer, without having to give any demanding analytical applications a pass. Further to this, each OmniaLabED+-system holds 100 litres of pure water type II ready for withdrawal in a storage tank that is equipped with quality recirculation. OmniaLabED+ is exactly right as pure water supplier to autoclaves and laboratory washing machines.

Features

Bulletpoint OptiFill dispenser is standard
Bulletpoint Continuous residual salts removal by electro-deionization
Bulletpoint 100 litre storage tank with recirculation and pressure outlet
Bulletpoint Tank volume display in percent
Bulletpoint Tank volume can be modularly increased
Bulletpoint Simple, cost-effective filter replacement
Bulletpoint Leakage sensor is standard

One hand operation

Easy water dispensing

Flexible on a work surface

Tank fits space-savingly under the bench-top

Flow chart and ED-Module

Specifications OmniaLabED+20 OmniaLabED+40 OmniaLabED+70
Type I
Conductivity μS/cm 0.055 0.055 0.055
Resistance M Ω x cm 18.2 18.2 18.2
TOC-value* ppb (with UV-unit) 1 – 5 1 – 5 1 – 5
Dispensing performance dispenser l/min. up to 2 up to 2 up to 2
Particles**/ml < 1 < 1 < 1
Bacteria** CFU/ml < 0.1 < 0.1 < 0.1
Type II
Pure water performance l/h at 15 °C 20 40 70
Conductivity µS/cm 0.067 – 1 0.067 – 1 0.067 – 1
Resistance* MΩ x cm 15 – 1 15 – 1 15 – 1
Silicate removal** % 99.9 99.9 99.9
Pure water tank pressurized outlet yes yes yes
Feedwater requirements
Drinking water according to DIN 2000
Feedwater temperature °C + 2 up to 35 + 2 up to 35 + 2 up to 35
Manganese and iron content mg/l < 0.05 < 0.05 < 0.05
Free chlorine content mg/l < 0.1 < 0.1 < 0.1
Silt density index (SDI) max. 3 max. 3 max. 3
Technical data
Operating pressure bar 2 – 6 2 – 6 2 – 6
Supply voltage Volt/Hz 90-240/50-60 90-240/50-60 90-240/50-60
Connected load kW 0.25 0.25 0.25
Connector size mm 3/4″ 3/4″ 3/4″
Ambient temperature °C + 2 up to + 35 + 2 up to + 35 + 2 up to + 35
Dimensions Tower*** W x H x D mm 511 x 1520 x 575 511 x 1520 x 575 511 x 1520 x 575
Dimensions Base cabinet tank mm 511 x 800 x 575 511 x 800 x 575 511 x 800 x 575
Weight kg 43 43 45
* in dependence on the feedwater quality       ** with sterilizing filter 0.2 µm       *** with OptiFill Dispenser
Article no. System type* Typical applications
18700020 OmniaLabED+20 Feedwater for autoclaves and laboratory washers
18700040 OmniaLabED+40 Feedwater for autoclaves and laboratory washers
18700070 OmniaLabED+70 Feedwater for autoclaves and laboratory washers
* RO cartridge, ultrapure water cartridge, sterile filter capsule 0.2 μm, sterile overflow and sterile vent filter + CO2 absorber included
Accessories
16125000 Water softener MixMulti 32
19200020 Pre-treatment unit OmniaLab – 10“
19200050 UV Flow through disinfection – 254 nm
19200052 UV Unit for TOC reduction – 254 nm
16561200 External pressure booster pump MQ 2000
16561600 External pressure booster pump MQ 3000